Intumescents Associates Group 15406 Crescent Oaks Ct.
Houston, Texas 77068.
Phone: 281-323-5322 Fax: 281-631-9202

 

 

.Home Page

NanoChar Technical Bulletin

Multifunctional Coating

Fire Retardant Coating

Data Library

Application Guide

Nano Science

Epoxy Technology

VOC's

Corrosion Control

Asbestos Encapsulation

Fire Retardancy

SSPC

FAQ

Fire Test Photo Gallery

Warranty Information

Order/ Contact Information

Links

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

 Intumescents Associates Group Multi Functional Coating

IAG Multi Functional Coating

IAG is a high performance, 100% solid multifunctional, solvent free epoxy coating.

This cycloaliphatic amine poxy is a highly chemical and moisture resistant material, which creates a protective barrier over a variety of materials and surface conditions.

The highly versatile coating is exceptionally surface tolerant. The lack of solvents allows the true chemical cure of IAG. This feature combined with its excellent flow properties eliminates any curling effect over surfaces where existing coatings or rust where not completely removed. IAG may be applied over inorganic zinc primers. IAG is very adherent to foam, lead, asbestos and may be used as an encapsulant for these materials.

All federal and local regulations must be followed when IAG is used in this manner.

The uniqueness of IAG as a maintenance coating allows it to be used in place of more costly multi-coat systems.

IAG's multi functionality provides a very cost effective solution for the protection of varied surfaces from moisture and corrosive attack. IAG may be sprayed after proper mixing, using standard airless equipment.

IAG may also be brushed, rolled or troweled.

It is recommended that surfaces should be prepared according to applicable SSPC standards whenever possible. Please review the application guide and material safety data sheets prior to use.


TYPICAL PROPERTIES:

 Color

gray

Viscosity @ 25 C

 7,000

 Tensile Strength

7,600 psi

Open Time

50 min

Operating Temp C

-50 to + 140

 Hardness, Shore D

78

Mix ratio by weight (A:B)

 100:30

Mix ratio by volume (A:B)

 100:35

ASTM 5894-96 Test Results:

 Evaluation Method

 Panel 1 9mils

 Panel 2 10mils

 Panel 3 11mils

 ASTM 660-93:Checking

 No Visible Signs of Checking

 No Visible Signs of Checking

 No Visible Signs of Checking

 ASTM 714-87: Blistering

10

 10

 10

 ASTM D 1654-92: Corrosion Table 1

8

 8

 7

ASTM D 3359-02:  Adhesion, Method A

 5A

 5A

 5A

 ASTM D 4214-98: Chalking, Method A

No. 8

 No. 8

 No. 8

IAG Multifunctional Coating conforms to the following SSPC standards:

 SSPC 15  SSPC 22

  SSPC 13.01

 SSPC 14.01

 paint 28

 

To the best of our knowledge the technical data contained here in is true and accurate on the date of publication and is subject to change without prior notice. User must contact IAG to verify correctness before specifying or ordering. No guarantee or accuracy is given or implied. We guarantee our product to conform to IAG quality control. We assume no responsibility for coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY IAG, EXPRESS OR IMPLIED, STATUTATORY, BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. June 2003

Web site design and Internet Marketing by WADSAA, Inc.