Resources
Guides for planning a floor coating
Written for facility managers, owners, boards and general contractors who need to plan the work, not just pick a color.
Guides
- Moisture testing before coatingWhy slab moisture decides the system, and which tests are used
- Planning floor coating downtimeClosures, phasing and cure stages
- Cleaning and maintaining coated floorsDaily soil, winter salt, scrubbers, stains and when to refresh a topcoat
- Why epoxy floors peel or failHow moisture, contamination, weak concrete and poor preparation show up
Real questions from homes and working facilities
Choose the situation that matches the floor in front of you. Each article gives a direct answer, explains what changes it, lists the evidence to collect and connects the decision to the right service page.
- What changes the cost of an epoxy garage floor?Square footage matters, but the concrete under the coating usually creates the largest difference between a simple garage and a difficult one.
- How long does an epoxy garage floor last?The honest answer is a range, and the variables that shorten the range are usually visible before the coating is installed.
- Epoxy or polyaspartic for a garage floor?Neither chemistry wins every category. The useful question is where each one belongs in the complete floor system.
- Can a garage floor really be finished in one day?Sometimes the coating layers can be installed in one working day. That does not mean every slab is ready for the same schedule or that vehicles return that evening.
- Can epoxy go over cracked concrete?Yes, many cracks can be repaired and coated, but the reason the concrete cracked determines what “repair” should mean.
- Why does garage epoxy peel under hot tires?Heat and turning force reveal weak bond areas, but the root cause is often preparation, contamination, moisture or cure rather than the tire alone.
- How should a coated garage floor handle road salt?The coating should resist ordinary winter exposure, but salt solution, embedded grit and damaged edges still need a cleaning and inspection plan.
- When can you park on a new epoxy floor?Use the written vehicle-return time for the exact system and temperature—not the moment the surface first feels dry.
- Can you epoxy a basement floor with moisture?Sometimes—but the moisture source and measured slab condition must be understood before a low-permeance coating is selected.
- Can epoxy go over old paint or concrete sealer?Only when the existing layer is identified, firmly bonded, clean, compatible and prepared for the new system. Unknown or loose material is a weak foundation.
- Is epoxy flooring slippery when wet?A smooth resin floor can become slippery with water, grease or residue. Texture helps, but the right answer also includes drainage, cleaning and footwear.
- Is metallic epoxy a practical floor or only a showpiece?It can be both, but the dramatic movement and gloss come with appearance variation, scratch visibility and maintenance decisions that should be accepted before installation.
- What flooring works best in a restaurant kitchen?The best system is the one that fits heat, grease, washdown, impacts, drains and the closure the operation can actually provide.
- When should you use urethane cement flooring?Use it where wet service, temperature swings, impact, chemicals or elevated slab moisture exceed what a standard thin coating should handle.
- What replaces a failing quarry-tile kitchen floor?A seamless resinous system can be a strong replacement, but only after tile, setting material, contamination and drain details are removed to a stable base.
- How long must a restaurant close for new kitchen flooring?The coating cure is only one part of the closure. Equipment, demolition, repairs, plumbing, sanitation and full-service cure often control the real reopening date.
- What floor coating works in an auto repair shop?The correct system follows the harshest bay: chemicals, hot tires, lift points, welding, rolling loads, drains and the cleaning routine.
- Should warehouse joints and cracks be coated over?Some static cracks can be repaired and coated. Moving or designed joints need a deliberate detail so forklift traffic and slab movement do not destroy the finish.
- Can a warehouse floor be coated without shutting down?Often yes, through disciplined phases—but every open route, dust boundary, cure zone and transition has to be designed before the first grinder starts.
- What should a clinic ask before choosing a floor coating?Start with cleaning, rolling loads, transitions, occupied-room controls and the exact reopening sequence—not with a color board.
Questions people ask
What should I learn before comparing quotes?
Understand moisture testing, preparation, the layer build, cure stages, repair allowances and what traffic the topcoat is designed to handle.
Which guide should I read first?
Read the moisture guide for older or below-grade slabs, and the downtime guide when the room or facility cannot close for long.
Can these guides replace a site assessment?
No. They help you ask better questions; testing and inspection still decide whether the proposed system fits the actual concrete.
Tell us about the floor
The quote form takes a few minutes. It asks for the ZIP code, floor area and current condition. Add photos, paste a share link or send visuals later—it is your choice.